That file doesn't seem like it would work for a number of reasons.
The gear with integrated hour hand wouldn't be able to rotate in the space that it's mounted. In order to tell the time against the ring, the hand would need to be much further away from the gear.
Secondly, the funnel bit seems to have no real purpose; if you have to pipe water to the funnel, why not just bring it directly to the cup at the bottom? In real water clocks there is usually a primary collector but it's built in such a way that it overflows at a certain level so that the pressure on the outgoing line stays constant. The funnel here does essentially nothing and there is nothing else in the clock that would provide any kind of flow rate calibration; you'd have to do that externally.
Lastly, it's not clear how you'd reset the clock. Can the collector be removed separately or do you need to turn the whole clock upside down to pour the water out and get the float back down to the bottom?
pmdulaney 7 hours ago [-]
If you are a tinkerer you will be impressed by the video.
beej71 5 hours ago [-]
Very cool. I love that, as someone steeped in digital programming, such solutions would not have occurred to me. It's a good argument for breaking out of ones shell now and then.
zshn 7 hours ago [-]
seems like it's down? hn hug of death?
peesem 7 hours ago [-]
seemingly hugged, unless they're doing overzealous IP blocking
This file is similar, but not the same: https://www.thingiverse.com/thing:3407682
The gear with integrated hour hand wouldn't be able to rotate in the space that it's mounted. In order to tell the time against the ring, the hand would need to be much further away from the gear.
Secondly, the funnel bit seems to have no real purpose; if you have to pipe water to the funnel, why not just bring it directly to the cup at the bottom? In real water clocks there is usually a primary collector but it's built in such a way that it overflows at a certain level so that the pressure on the outgoing line stays constant. The funnel here does essentially nothing and there is nothing else in the clock that would provide any kind of flow rate calibration; you'd have to do that externally.
Lastly, it's not clear how you'd reset the clock. Can the collector be removed separately or do you need to turn the whole clock upside down to pour the water out and get the float back down to the bottom?